Sunday, October 30, 2011
Suspension Lift Kits For Truck
make choice for for suspension connection is very importan thing. we must remember good brand is must have good quality. quality is same as a safety riding.
we know buying lift kits its important to understand first what it is. A lift kit is a vehicle modification that is used to lift either the suspension or the body underneath the car. Installing the lift kits will make the wheel wells of our vehicles to become higher so we can install tires. as we know, Currently there are two types of lift kits in the market, the body lifts and suspension lifts, each with their own advantage and disadvantage.
the Prices of lift kits vary from one manufacturer to another depending on the model and type of lift kit. for example lift kits for trucks is different shape from ussual, that must be have diferent prise too. so technically advanced that it takes an engineering degree to make any sense at all, and it continues to get more complex. Modern truck builders use complicated set ups to try and find the balance between ride quality and off-road performance.
The aftermarket suspension industry is the only place for looking looking some model of suspension lift kits, shocks absorbers, leveling kits and other suspension related products. usually we can contact the staff by email or phone for the best in knowledge and customer service about their product.
When the off-road scene took off few decades ago, folks began tinkering with their truck's suspension. A few entrepreneurs quickly caught on and as the industry grew, their businesses grew right along with it.and These days suspension lift kits are big business.
the Suspension lift kits are costlier than body lift kits but will improve ground clearance more. Lift kits for trucks are readily available from several manufacturers in a wide range of prices. If you are planning to install a lift kit in your truck, it is advisable to consult a mechanic or specialist first so that you can discuss it in detail. On the other hand, you should take note that installing an aftermarket truck lift kit may void your vehicle warranty.
Tuesday, October 4, 2011
quality motorcycle helmets by Japanese company Shoei
quality motorcycle helmets by Japanese company Shoei. as a rider we must know the little history about this helmet produsen. famous safety helmets from japan.
Since 1958, the Joint stock Japanese company Shoei has been producing quality motorcycle helmets. The company’s roots go back to the discovery of Kamata Polyester in 1954, when the first helmets were produced mainly for the use in the construction industry. 1960 marked the year when Shoei’s founder, Eitaro Kamata began manufacturing helmets for the motorcycle racing sector.
Headquartered in Taito, Tokyo, Japan, the factory produces each shoei motorcycle helmet to meet the Japanese Industrial standard which includes guidelines for classifying and numbering. The Honda Motor Company adopted the Shoei helmets as their “genuine” helmets in 1965. This very much increased the popularity and availability of the Shoei motorcycle helmets. Due to expansion, the currently operative factory in Iwate was built in 1989.
All Shoei helmets are designed and manufactured in Japan, although the product is distributed and sold globally. Despite their large success, the Shoei employs only about 500 people worldwide and the remain a relatively small company. Even so, Shoei’s GRV helmet was actually the first helmet to use carbon fiber and Kevlar. This makes the helmet’s material super durable and very light weight at the same time. Shoei was also the creator of the very first coverless shield system as well as the Duel Liner Ventilation system. In 2003, Shoei won the award for Product of the Year after their introduction of the flagship X-spirit which quickly became known as the most advanced helmet in the world.
The Shoei company has released several other award winning helmets such as the RF-1000 and the X-Eleven. Get a brand new shoei motorcycle helmet today and try out one of the best and safest helmets in the world.
Riding a motorcycle could be a lot of fun and adventure. However, the fun and adventure could turn out to be very dangerous if you do not take appropriate safety measures. The safety of the motorcycle as well as the rider depends highly on the motorcycle tires as well as the motorcycle gear. Among the other items which constitute the motorcycle gear, helmets are definitely the most important.
Thus, it is important that you select quality products from reputed brands to ensure durability and functionality. Shoei helmets are one such brand which has been extremely popular for their useful features and longevity.Shoei helmets are available in a variety of styles, designs, colors, and patterns. The variety of features and the styles are designed to suit the varied taste and needs of different riders. Along with safety and style, these helmets are equally popular for their affordable prices. Along with being cost-effective and stylish, the company offers complete commitment for the quality and safety of the rider. Shoei helmets have earned the trust of their customers for this no-compromise-with safety attitude when it comes to manufacture quality motorcycle gear.
Founded in 1959, the company collaborated with the Honda Motor Company in 196 and has ever since been recognized as one of the best selling motor sport helmets.The special features of Shoei helmets have distinguished them from other companies. One of the most impressive features is its ventilation. This feature is highly instrumental in ensuring the comfort of the rider. When the rider wears this helmet and turns the head from one side to another, the vents in the helmet replaces the hot air from inside with fresh air. There are some high end models that have 'Aero Vortex Ventilations' which makes wearing the helmet extremely convenient while driving. The other interesting feature that distinguishes these helmets from the motorcycle gear of other companies is the Pinlock, Mist proof Visor. This visor keeps the visor clear so that the rider can see clearly while riding.
motorcycles and jacket protect the rider for protection
In some countries, motorcycles become the main vehicle for all citizens. Each family sometimes has more than one motorcycle, even more than two. Riding a motorcycle requires more safety, as it is not "weatherproof", and theft can easily happen.Unlike in the
Motorcycle is the most popular way of transport in the world today. The rising fuel prices as well as the congestion in traffic have made this the easier and practical form of transport. The motorcycle is one of the most common forms of transport in countries in the developing counties mostly Asia and Asia-Pacific, including Japan. The four largest motorcycle makers in the
world are India, Japan, Vietnam, Indonesia and d China.
With the popularity in this form of transport it is but natural that the clothing has to be designed to help the people who ride it. Since the rider is not protected by a roof or a seat belt like in cars, the need for apparels which would protect is very necessary.
The foremost part of the body which is very much in need for r it is the head. Almost all the accidents with motorcycle have resulted in brain injury usually leading to death. As the rider is thrown out the head takes the fall. The helmet has been made to save this. The helmet should be of a good quality one which has the DOT endorsement by the Department of Transport.
Next in the list of apparels comes the jacket to protect the rider for protection. This should fit like a second skin for best protection. In cold countries leather motorcycle jackets are used mostly for the obvious reasons. It should be thick for safety reasons. The thickness should measure 1.5 mm to 1.6 mm for colder regions and less for the others. Leather gloves are a necessity in the cold regions to so as to protect the rider’s hands from freezing and losing the flexibility.
Chaps are a form of leggings with a belt, usually worn over the pants. These are usually made of leather or leather like material. The leather chaps worn in shotgun style are what motorcyclist wears. The smooth side of the leather is always out and it usually provides all around protection for the legs. They usually have zippers too so that it can be worn easily. This is a popular wear
in bike cultures which gives protection from cold, wind as well as from cuts and bruises when taking a fall. Boots are also a part of the motorcycle wear but mostly used for style.
With the rising accidents in the congested roads, especially in the major cities around the world, it is very necessary to have protection in the form of seat belts or the other necessary wears.
buying Used Motorcycle Frames ideas
Though many people are attracted to the idea of buying Used Motorcycle Frames so they can save quite a bit of money, you should always remember that Used Motorcycle Frames basically already have some wear and tear on them (which means quality goes down already somewhat.) This indicates that a buyer of Used Motorcycle Frames should never expect to get the same level of quality that new motorcycle frames could provide – it just doesn’t happen that way (unless the Used Motorcycle Frames are sourced from relatively unused motorcycles which would mean the frames are practically brand new then. But don’t hold your breath that that will turn your way.)
Why is the quality of Used Motorcycle Frames a basic factor to consider? First off, the geometry, frame strength, and weight distribution of each frame can influence very much how well the motorcycle performs under certain riding conditions. Motorcycle aficionados call this the “riding feel” of the motorcycle. Thus, very good Used Motorcycle Frames can provide a very good riding experience, while sub-standard Used Motorcycle Frames may provide you with a less than desirable riding experience (and maybe a few broken bones in the process if the frame breaks while you’re riding it.) So obviously, you need to get excellent products, even if they are used.
Used Motorcycle Frames are occasionally referred to as pre-owned motorcycle frames so when looking online for reliable suppliers, you can use that as an alternative search term. Some suppliers online permit return of any purchased Used Motorcycle Frames provided you meet certain stipulations such as return of the products within a certain time frame, the condition of the product to be returned, and how much of a refund you stand to get provided you meet the conditions of the company. You also have to ask if they will absorb the cost of the shipment or you will.
The nice aspect of shopping online for Used Motorcycle Frames is that you can canvass offers from all over the world. If you are in the US, and are not satisfied with the US suppliers you find, you can always head to websites of suppliers based in other countries like the UK or Japan, if you prefer. Another nice aspect of online shopping is that you can tap into the services of the small-time players and the products of the larger players at the same time – the Internet is really a great equalizer for Used Motorcycle Frames suppliers of any size and competency.
It is funny, but there are even online suppliers who can sell you wrecked motorcycles, if that is what you prefer to get. Why would anyone buy a wrecked motorcycle?, you may be wondering. Well, try searching for the term “wrecked motorcycles” and you’ll find out for yourself.
Some Used Motorcycle Frames might also be offering other services too, like custom-made motorcycle frames, and sale of other motorcycle parts. If you are already on their website anyway, it might pay to browse through their site and see what else they may be offering. You might spot a freebie or promo along the way to sweeten the deal for you.
source : google.com
motorcycles are so noisy
all motorcycle apparels helmets is primary importance
- safety first- that mean we must use helmet in our head.
- no helmet - we will get a ticket from highways police (extra money will spent).
- motorcycle can be separated from this motor helmet gear.
- safety riding use helmet - avoid fatals head crash. use it for safety riding motorbike
- so get trendy with cool helmet is best solution. don't be shy whith use this motor gear.
- Leading edge graphic design.
- Based on KBC VR-2 helmet.
- Type: Racing.
- Tri-Composite Aramis Epoxy shell.
- Bag-molded for shell consistency, strength and lightness.
- Reduced shell dimensions.
- Aerodynamic shell stability styling.
- Racing vision aperture.
- KBC Ultra-Quick Removal shield mechanism.
- 2.2mm OPCC (Optically Perfect Complex Curve), scratch-resistant anti-fog shield.
- RIB shield sealing technique.
- Internal comfort lining designed for comfort and noise reduction.
- Microfiber developed especially to wick away moisture.
- Removeable, replaceable interior.
- Controllable air ventilation and cooling system.
- Meets or exceeds Snell and D.O.T. standards.